cancel
Showing results for 
Search instead for 
Did you mean: 
erinhallmark
Community Team
Community Team

Canvas Release: MasteryPaths (2016-11-19)

This document introduces the Canvas MasteryPaths feature as noted in the Canvas Beta Release Notes (2016-11-07) and Canvas Production Release Notes (2016-11-19). MasteryPaths is available in all regions worldwide.

 

MasteryPaths requires the Mastery Paths feature option in account settings, which can be enabled by any Canvas admin. When allowed at the account level, the feature can be enabled on a course-by-course basis.

 

When enabled for a course, MasteryPaths affects Modules and items in Assignments, Discussions, Quizzes, and Pages.

 

The Canvas MasteryPaths feature allows instructors to customize learning experiences to students based on student performance. MasteryPaths is based on differentiated assignments, an existing Canvas feature. Instructors and course designers can identify activities for each student’s learning path and differentiate assignments for required learning, optional learning, or choosing their own content and assignments within a specific path. All assignments and pages should be created before publishing course content to students.

 

 

Account Setup

MasteryPaths requires the Mastery Paths feature option in account settings, which can be enabled by any Canvas admin. When allowed at the account level, the feature can be enabled on a course-by-course basis.

 

Additionally, a new admin, Conditional Release API, will be added to all Canvas accounts by default. This admin should not be removed for accounts that want to use MasteryPaths, otherwise MasteryPaths will not work correctly. The API will be removed as an account admin in a future release.

 

Modules Setup

The MasteryPath process currently only originates from the course Modules page. Before a user creates conditional assignments, all course assignments and pages should be developed and added to Modules as module items. MasteryPaths can be created from module structures in existing courses or new course content.

 

Indenting module items can be used to help organize the modules structure and visually show which items should be part of a MasteryPath.

 

Existing-Modules-Content.png

 

Modules Requirements and Prerequisites

Module requirements and prerequisites are not specifically required for MasteryPaths. However, setting requirements may be helpful for students to see the scope of the course and emphasize course organization.

 

Assignment Content

Any graded assignments, graded discussions, and quizzes in a module can be the source for a MasteryPaths item and can also be set as conditional assignments directly from the module.

 

Module items that cannot be used in MasteryPaths include ungraded assignments, ungraded discussions, practice quizzes, and surveys (both graded and ungraded).

 

Page Content

Because pages do not require grading, pages cannot be the source of a MasteryPath and can only be added to an assignment as conditional content. However, a page must be edited and set up as a MasteryPath item before it can be added to a conditional path.

 

To enable a page for MasteryPaths, open the page from the module. After editing the page, select the Allow in mastery paths checkbox. This checkbox allows MasteryPaths to select the page as a conditional item. Otherwise, the page will not display as an option for conditional content.

 

Mastery-Path-Page-Checkbox.png

 

 

MasteryPaths Creation

To create a conditional assignment, begin with a module assignment that should be required by all students. Such items can include a pre-test or an introductory assignment that act as foundation for a student’s learning. The assignment’s Settings menu displays a MasteryPaths option, which accesses the MasteryPaths configuration page for the item.

 

Note: Items that cannot originate a MasteryPath, such as pages, as well as items that do not support MasteryPaths will not display the MasteryPaths settings option.

 

Modules-Page-MP-Open.png

 

Configuration Page

The MasteryPaths configuration page allows instructors to add additional items in the modules list as conditional items that are only assigned to specific students through conditional rules. The configuration page for a conditional item is located in the item’s MasteryPaths tab.

 

Note: The MasteryPaths tab is available in assignments, discussions, and quizzes, so additional content around the tab may vary.

 

MasteryPaths-Tab.png

 

 

Conditional Rules

Conditional content is created based on a set of rules in three scoring ranges. After the initial assignment has been graded by the instructor, the student’s score designates which conditional items(s) will be assigned as a learning path. For instance, a student who scores above 90% on an assignment could be assigned more advanced work, while a student who scores below 60% could view assignments designed for content clarification and improvement.

 

The ranges display according to the display set for the assignment—points, percentage, letter grade, or GPA. The three ranges default to 70%, 40%, and 0% of the assignment’s point value, rounded up respectively. For instance, an assignment worth 25 points defaults to ranges of 25–18 points, 18–10 points, and 10–0 points. However, each range can be customized to a range outside the default values by clicking the value and making the preferred adjustment.

 

Conditional-Scoring-Ranges.png

 

Any existing item in the course can be added as additional content. To add conditional content, select the range where the conditional content should be created and click the Add button. In the content window, select the item(s) that should be added for the selected range. Content can be searched by name, or in the adjacent drop-down menu, items can be filtered by type. If a content item does not display in the content window, the item cannot be added as a conditional release item.

 

Select-Conditional-Assignments.png

 

If additional items are added to a range at a later time, any item already added in the range will be crossed out.

 

Note: Pages will not display as a conditional item unless the page was edited to be included as a MasteryPath item.

 

And or Or Setting

Up to three existing items in a course can be added to each range, either in the form of individual items or groups. When more than one item is added to the same range, the items default to be completed together as indicated by the And (ampersand) symbol. Students who complete the assignment and score in a range with joined assignments must complete all the assignments in the conditional path.

 

However, the path can be set to complete only one item or group in the path by clicking the And symbol, which separates the items and displays an Or button. Students who complete the assignment and score in a range with an Or designation can select which item(s) to complete as part of the conditional path.

 

Multiple items within a range can be mixed and matched as individual items, grouped items, or both. Items can also be reordered within the range by dragging and dropping in the preferred order.

 

Conditional-Assignments-And-Or.png

 

Item Management

Each item includes an options menu for quick access to edit the item, move the item, or remove the item from the conditional path. Items can also be moved to another range by drag and drop.

 

Assignment-Mastery-Paths-Move.png

 

If necessary, users can delete multiple items at once by hovering over each item, selecting the check mark, and clicking the Delete key on their computer keyboard. This behavior will be adjusted to support additional bulk functionality in a future release.

 

Assignment-Mastery-Paths-Bulk-Actions.png

 

Notes:

  • Added items can include due dates, but due dates are controlled by each individual item, not by the conditional path. Instructors may want to confirm any assigned due dates for conditional items are aligned with the rest of the coursework appropriately in the module page structure.
  • If conditional items are added to a path and later changed (such as separating conditional items in the same range or adding another item), the change will not apply to any students who have already been graded based on the original conditional path. Conditional items should be final when course content is published.

 

Index Page Assignment Indicator

Once the assignment is saved, the assignment displays a MasteryPaths link in the Modules page. This link is also displayed in the assignment's respective index page—Assignments, Discussions, and Quizzes, respectively. When selected for an individual item, the MasteryPaths link directly opens the configuration page for the item.

 

Modules-with-Mastery-Paths-Instructor-View.png

 

Conditional items also display the Mastery Paths indicator showing the range that triggers the release of the item. If an item includes multiple ranges, the MasteryPaths indicator shows there are multiple ranges.

 

Note: The same item may be added to more than one source MasteryPaths assignment.

 

Modules-with-Mastery-Paths-Ranges-Instructor.png

 

Conditional assignments can also be set up as their own MasteryPath source. These assignments show both the MasteryPaths link and the conditional range of the item where it was already added.

 

Modules-with-MasteryPaths-and-Additional-Paths.png

 

Differentiating Assignments for MasteryPaths

By default, assignments in Canvas are assigned to Everyone, which means all students will be able to view the item in their Modules page. All content items added to a MasteryPath should be set as a differentiated assignment for MasteryPaths, as it is only meant to be distributed as a conditional assignment.

 

For each conditional assignment, open the assignment and view the Details tab.

 

Assignment-Assign-to-MasteryPaths.png

 

Details-Tab.png

 

In the Assign field, remove Everyone from the item and replace it with the MasteryPaths option. The Mastery Paths assignment designates the assignment for conditional release only, and the assignment will only display to students whose scores fall in a range that releases the assignment to them.

 

Assign-To-MasteryPaths-instead-of-Everyone.png

 

Student View

Once Modules and their content have been published, instructors can use the Student View feature in their course to view Modules as students will see them. The only course items that should be visible are items assigned to Everyone. If a conditional item is displaying in student view, the assignment may not have been edited to become a differentiated assignment for MasteryPaths.

 

Student-View-Modules.png

 

 

Student Workflow

For students, Modules only shows items that have been published and assigned to Everyone or assigned specifically to an individual student.

 

Student-Workflow-Modules-1.png

 

Conditional items are automatically included in the module once the instructor has graded the source MasteryPath item. Once the assignment has been graded, the conditional item(s) will display in the student’s Modules page based on the item’s scoring range.

 

Note: When students complete a MasteryPath assignment that requires any manual grading, and module items are required to be completed in order, the item is shown as being locked until the assignment is graded.

 

Conditional Item Options

If a conditional path allows students to choose an assignment, students are shown that they must choose an assignment. They can select which option they prefer for their assignment path.

 

Student-Modules-Choose-Assignment-Group.png

 

Additionally, when a student is assigned or selects a conditional item, the conditional assignment automatically adds the student’s name to the assignment as being differentiated to that student.

 

Note: If an instructor regrades an assignment after a student chooses a mastery path option, and the regrade puts the student’s grade in a different conditional rule group, the student will have to choose another mastery path option and complete it before advancing through the module.

 

Instructor Assignment Sidebar Summary

Once students complete a specific assignment, instructors can view the breakdown of the mastery path ranges in the assignment. Each range includes a link that shows the number of students who scored in each range. Instructors can click the name of a student in the range, view the student’s score and submission, and send a message to the student.

 

Sidebar-Mastery-Paths-Breakdown.png

Labels (1)
99 Replies
chofer
Community Coach
Community Coach

 @corey_jeffers ​...

What you're looking at is the "Settings" screen in your course.  You need to click on your "Admin" button on your left blue nav bar, and then go to the "Settings" >> "Feature Options" page to turn it on.  Hope this helps.

chofer
Community Coach
Community Coach

Thank you, Ken Black!  I missed the part about changing "EVERYONE" to "Mastery Paths".  Good to know. 

Is "conditional" including having any prerequisites or requirements set for the module where those assignments reside?  If so, I don't have any prereqs or requirements set for the module.  What about you?

kona
Community Coach
Community Coach

I think your admin has to "allow" it or turn it on in your Beta instance first. Then you can go in and play with it!

erinhallmark
Community Team
Community Team

Originally posted in the release notes from Tracey DeLillo:

I turned on Mastery Paths for one of my test courses, and when it is enabled I cannot set a due date in a new assignment. It doesn't accept anything from the calendar or manually typed in. Bug?

Ken Black included the screenshot below, which is included as a known behavior in beta right now. The workaround is that you can still enter the full date or select a date from the calendar; it will still save.

due+date.jpg

kblack
Community Member

That's a good point,  @chofer ​ and might be up for interpretation.  I interpreted "conditional" in this case to mean in the sense that it's part of the Mastery Path "conditions" that are set up on that point value page.  But you may be correct. 

But in either case, no--I did NOT have the Modules subject to any prerequisites at all, and all the students can see is the very first item and none of the others that should be opening up for them within that Module.

And speaking of Modules (erinhallmark​, this one's for you!) I'm curious about this statement in the documentation: All conditional items for a course must be included in Modules as a module item.  Since by disabling the EVERYONE in the assignment itself turns it into, essentially, a differentiated assignment, would the assignments simply not appear on the Assignments page as they presently do not for students that don't meet a certain condition?  In other words, what if someone didn't want to bother using Modules but just have a rather simple, fairly linear Mastery Path that pointed to either assignment x or assignment y depending on their completion of assignment A?  Would that not still work even if they chose not to use Modules in the rest of the course.

(I obviously understand why Modules are the preferred choice and they certainly make the most sense, but I'm just thinking of other possible scenarios.)

erinhallmark
Community Team
Community Team

Hi, Zach,

Nope, this is something we're currently looking into as a known behavior. We hope to have an answer soon!

Thanks,

Erin

erinhallmark
Community Team
Community Team

Hi, Matt,

Modules can be shared in Commons. Smiley Happy

Thanks,

Erin

erinhallmark
Community Team
Community Team

Hi, Ken and Chris,

Conditional just means that an assignment is set up to be distributed as part of a MasteryPath range; it's only released to a student if the student's grade falls within the range for that assignment. Prerequisites and requirements in a module don't matter in MasteryPaths, unless you want students to complete module items in order, etc. Although the "Lock" designation is probably more significant and makes more sense when students have to complete module items in order.

So the document mentions that students can only view assignments that are assigned to them or set to Everyone (this behavior hasn't changed). By default, an assignment has to be assigned to someone, right? The Everyone differentiator by definition means that everyone will get it, so in Chris's example, he had both of his conditional assignments set to Everyone, meaning they were already available and wouldn't have been "released" to the students who fell within each range.

The MasteryPaths differentiator is basically a differentiated assignment distinction (just like assigning an assignment to a section or individual student). It's purpose is to make an assignment available to be released but not display in a student's module until a later time. (Previously there was a workaround to create an empty course section and assign the assignment to that section, which wasn't a good strategy for the long term.) Smiley Happy 

Modules is just the current vehicle that releases the items to students based on MasteryPath completion. Students cannot view any item differently if they were to view the item's index page (e.g. assignments in the Assignments Index Page or pages in the Pages Index Page). This behavior has not changed with differentiated assignments. In the future this behavior may change, but for now, items have to be included in Modules for MasteryPaths to work correctly.

Hope that helps,

Erin

jhendricks1
Community Member

If my MasteryPaths isn't showing up in my Admin Settings/Feature options, is this because our system needs to update tonight?

kblack
Community Member

Hi Jessica - If you look at the very top of this document, it mentions MasteryPaths uses an API that is being enabled manually across beta environments and may not yet be available for your institution.  You may want to check in with your CSM to see if they can give you an estimate if it's not enabled for you soon.